Electro optical modulator (EOM) is an essential component in optical fiber link. When the Puckel box drive power receives the trigger signal, the output terminal will generate a high-voltage signal of the same frequency. The drive power has the communication feedback function, which can feed back the power state and trigger state of the drive power to the control center through optical fiber
(* Please contact customer service for specific parameters)

UPHFT series heat (flow) sensor is a direct reading sensor used for thermal measurement, which can measure the instantaneous heat flow value and the absolute temperature value of the measuring point in real time
  Size series: φ 3.2*7   φ 2.5 * 4, small diameter has little influence on the surface profile of the model
  Response time ＜ 50ms
  Sensitivity: ＞ 30uV/(kW/m ²）
  Built in T-type thermocouple to measure the temperature of the measured point at the same time
  The extension cable is customized according to customer needs
  Continuous operating temperature ≤ 300 ° C

Coaxial thermocouple is a heat flow sensor developed based on the heat conduction theory of surface temperature measurement, which is used for aerodynamic heat measurement in shock tunnel, explosion heat flow measurement, engine test, etc
  Sensor diameter: 2.0mm, 1.5mm
  Insulation thickness:<5-8 μ m
  Measurement accuracy:<7%
  Heat flow response time:<10 μ s
  Heat flow measurement range: 10kw/m ²- 10 Mw/m ²
  Air flash temperature:>10000 ℃
  Temperature rise of sensor surface:<500 ℃

This product is a specially packaged number of customized thermocouples, which are used in special installation occasions to measure temperature
  Thermocouple type: T/N/K/J/E
  Customized materials resist thermal shock without cracking
  Reliable connection of 2pin quick plug (socket)

Plug calorimeter is a heat flow sensor commonly used in thermal structure test, which has the characteristics of simple structure and small size
  Response time 0.2 s
  Range 3MW/m ²
  Overall dimension series φ 3*9； φ 4*9； φ 6*9
  The extension cable is customized according to the needs

This product implements GJB599A-1993, which is equivalent to MIL-DTL-38,999 standard
  Bayonet quick connect
  Small size, light weight, high contact couple density
  EMI/RF I shield
  Contact crimping can be removed, and oblique insertion prevention design
  Receptacles can be box type, wall type, front mounted, rear mounted and nut fastening type
  Standard tail accessories according to GJB1784
  Special tail for clamping shielded cable
  Type shell number, 70 types of hole group arrangement
  The interface and tail of the insertion surface have a sealing structure, with excellent three proofing performance
  Five key position guiding mechanism, with five anti misplacing key positions

Series II conforming to GJB599A (MIL-DTL-38999K) standard
  Bayonet quick connect
  Smallest volume, lightest weight and shortest shell
  EMI/RFI shield
  Contact crimping can be removed without oblique insertion
  Receptacles can be box type, wall type, front mounted, rear mounted and nut fastening type
  It is suitable for use in situations that do not bear high strength vibration or severe wind sand and humidity
  The interface and tail of the insertion surface have a sealing structure, with excellent three proofing performance

This product implements GJB599A-1993, which is equivalent to MIL-DTL-38,999 standard
  Three head thread quick connection with anti loosening mechanism
  Minimum volume, light weight, high contact couple density
  With electromagnetic shielding function
  Contact crimping can be removed, and oblique insertion prevention design
  With fireproof shell, composite shell, aluminum alloy shell and various coatings
  It has high strength vibration characteristics under high temperature, and is suitable for use in harsh wind sand and wet occasions